Slowly does it
  • Home
  • Workshop
  • Cello
  • Cello #2
  • Ducati

Building Cello #2

Making the mould part IV

24/2/2021

0 Comments

 
Continued with the mould today. First I reduced the thickness of the spacers I had glued on yesterday. Initially I had planned to thin them only from one side, but that would have left the spacers very different thicknesses. So I decided to remove 10 mm from both sides. After having fixed the thickness of the spacers on the front side, I glued on the spacers on the back side.
Picture
0 Comments



Leave a Reply.

    Author

    Elias keeps growing so a bigger cello will be needed eventually. With the previous cello I had to hurry up a little as Elias needed it already. With this one I want to avoid the pressure.

    Archives

    April 2022
    January 2022
    July 2021
    June 2021
    May 2021
    April 2021
    March 2021
    February 2021

    Categories

    All
    Back
    Blocks
    Front
    Linings
    Link
    Mould
    Planning
    Purfling
    Ribs
    Tool
    Workshop

    RSS Feed

Site powered by Weebly. Managed by Avaruus.net
  • Home
  • Workshop
  • Cello
  • Cello #2
  • Ducati